C-130j needed for 3D scanning

Unread postPosted: 23 Jan 2020, 12:57
by standfast
Hi

I have a project to study a wing modification for the C-130j. I would like to 3D scan the aircraft inside a hanger. Additionally I need to take detail scans of the wingtip both attached and detached.

I would also be looking for taking a wing end from a salvage yard.

Is there anyone on the forum that can help me or point me in the right direction

All the very best Andy

Re: C-130j needed for 3D scanning

Unread postPosted: 28 Jan 2020, 12:49
by mekong68
You might reach out to the Univ of Dayton Research Institute (UDRI), they have a complete C-130H sitting in their parking lot outside in Dayton for some govt contract work with 3D printing and other stuff.

Re: C-130j needed for 3D scanning

Unread postPosted: 02 Feb 2020, 14:11
by standfast
Thanks for that. I will start looking in to it and keep you updated.

Cheers